2024+ Can-Am Maverick R Trailing Arm Pivot Gusset

The trailing arm mount is one of the first things to crack when you send your Maverick R hard. This weld-in Trailing Arm Pivot Gusset reinforces that high-stress pocket on the 2024+ Can-Am Maverick R, distributing load across the frame and preventing the fatigue cracking and bolt-hole elongation that show up under heavy off-road use. Precision-fabricated from 11-gauge mild steel. Cheap insurance for an expensive problem.

Reinforce the Weak Point Before It Cracks

When you push your Can-Am Maverick R through rock gardens, big jumps, and desert ruts, the factory trailing arm mounting zone takes enormous load. Over time, that stock pocket can develop fatigue cracks, or the bolt hole can begin to elongate, throwing off the fitment and alignment of your trailing arm pivot. Left alone, it turns into an expensive chassis repair.

This reinforcement bracket addresses both problems. It strengthens the trailing arm mount pocket and distributes load more evenly across the frame interface, helping prevent the cracking commonly seen in this area. It also provides a stronger support structure if the trailing-arm bolt starts to open up the mounting hole, helping restore proper fitment and alignment of the arm pivot.

Important: Weld-In Installation — Professional Fabrication Required

This is a weld-in component, not a bolt-on part. Installation requires access to the trailing arm mount area, proper surface prep, welding equipment (MIG or TIG), and welding skill. We strongly recommend having a qualified fabricator or shop perform the installation. Once welded, apply standard corrosion protection and inspect the welds periodically. If you're not set up to weld, factor professional installation into your purchase.

Why Maverick R Riders Add the Trailing Arm Pivot Gusset

• Prevents common trailing arm mount cracking. Reinforces the high-stress pivot pocket where fatigue cracks and bolt-hole elongation typically start under hard off-road use.
• Distributes load across the frame. Spreads stress more evenly across the frame interface instead of concentrating it at the factory mount.
• Heavy-duty 11-gauge mild steel. Chosen for excellent weldability and structural integrity, built for a permanent, rigid connection.
• Restores fitment if the bolt hole elongates. Provides stronger support structure that helps maintain proper arm pivot alignment.
• Cheap insurance for an expensive problem. At $29.99, far less than the cost of repairing a cracked chassis mount.

Protect Your Chassis. Reinforce the Pivot.

Don't wait for a cracked trailing arm mount to take your Maverick R off the trail. Add the Trailing Arm Pivot Gusset to your cart today and reinforce the weak point before it fails.