2017+ Can-Am Maverick X3 RS 72" Model Only Volt Billet Radius Rods (Clear)

When you machine radius rods this clean, you don't hide them under paint, you show them off. These High Clearance Billet Radius Rods for the 72" RS Can-Am Maverick X3 are finished in clear anodize that puts the raw 6061 billet machining on full display. Adjustable Heim joints, uniball articulation, and a raised high-clearance design give you the strength and geometry the factory rods can't match, with a finish that looks as serious as it performs.

Billet Machining on Display, Performance Built In

Run your 72" RS Can-Am Maverick X3 hard enough and your radius rods become the difference between clearing an obstacle and getting hung up on it. These High Clearance Radius Rods upgrade the strength, the geometry, and the look of that critical front-end link, all at once.

They're machined from 6061 billet aluminum, built to take the abuse of sandy washes, rocky lines, and high-speed runs without the flex of weaker rods. The clear anodized finish hardens the surface against scratches and corrosion while leaving the machined billet visible, so the craftsmanship that went into them stays on display instead of buried under a coating.

The high clearance design raises the rods up and out of the way to add ground clearance, so you stop dragging your undercarriage across the obstacles that used to stop you. The adjustable Heim joint links let you tune your alignment and geometry to your setup and riding style, instead of living with the factory's one-size compromise.

On one end, uniball joints deliver superior articulation and stability for predictable handling on rutted, uneven, and rocky ground. And the included anti-rocking dust rings limit tilt and twist while sealing dirt and debris out of your bearings, so your joints stay tight and last longer through hard miles.

For the rider who wants their suspension to perform and look the part, the clear-anodized billet is the build piece that does both.

Why 72" RS X3 Riders Choose These Radius Rods

• 6061 billet aluminum strength. Built to withstand sandy deserts, rocky trails, and high-speed abuse without the flex or failure of weaker rods.
• Clear anodized finish that shows the machining. Harder and more corrosion-resistant than bare aluminum, with the raw billet craftsmanship left on display.
• High clearance design. Raises the rods to add ground clearance so you stop scraping your undercarriage on the obstacles that used to stop you.
• Adjustable Heim joint links. Tune your alignment and geometry to your setup and riding style instead of accepting the factory compromise.
• Uniball joint articulation. High-quality uniball joints on one end deliver superior articulation and stability for predictable handling on uneven ground.
• Anti-rocking dust rings. Limit tilt and twist while keeping dirt and debris out of your bearings, so your joints stay tight and last longer.

Fitment Note: 72" RS Models Only

Important: These radius rods are designed for the 72-inch RS Can-Am Maverick X3 only. They are not designed for 64-inch X3 models. Confirm your machine's width before ordering, and contact us if you're unsure which model you have.

Stop Scraping. Start Clearing. Bolt Them On.

Give your 72" RS Maverick X3 the clearance, adjustability, and billet strength the factory rods can't match, with a clear-anodized finish that shows it off. Add the High Clearance Billet Radius Rods to your cart today.